Add favorite| 简体| 繁 体

power cord

Home >FAQ


Inquiry or order content


  • To speed up processing, please include as much as possible of the information listed below when placing an order or making an inquiry:

    • 1. Overall Length: Face of plug to end of longest conductor.

    • 2. AWG size & number of conductors.

    • 3. Color & UL type designation.

    • 4. Plug type.

    • 5. Appliance end finish:

      • 5.1. Molded connector - specify by Cat. No.

      • 5.2. Power supply cords - describe end processing from chart below.

    • 6. Strain Relief:

      • 6.1 Specify by Cat. No.

      • 6.2 Indicate location as center-line to end of longest conductor.

    • 7. Hank-up:

      • 7.1 Hanked-self secured - Specify body and free-end lengths.

      • 7.2 Unhanked-tied in bundles.

      • 7.3 Coiled - Specify critical diameter and free-end lengths.

    • 8. Required approvals: UL and/or CSA,VDE,BS,SAA...etc.

    Standard Factory Tolerances


    Overall length up to 10 ft. Plus or Minus 1 in.
    Over 10 ft. Plus 2 in. Minus 1 in.
    Split or Jacket Removal. Plus or Minus 1/4 in.
    Strip. Plus or Minus 1/16 in.
    Location of Molded Strain Relief. Plus 1/4 in. Minus 1/8 in.
    Stagger. Plus or Minus 1/8 in.
    Hank Cap End. Plus or Minus 1 in.
    Body. Plus or Minus 1 in.
    Free End. Plus or Minus 2 in.
    		power cords



Package Information

power supply cords power cords power cords ac power cords
Packed single in PE bag/ctn
Packed 5/10 pcs in PE bag/ctn
Bulk hank and packed in ctn
Single hank and bulk in ctn

 

You can also tell us your idea about package,and then we pack it according to your need.

 

Hanking detail

power cord power cords power cords
Twist tie hank(ladies body)
Coil tied(round)
Bulk packed